IFR CPM20 frequency & power meter

This forum exists for the purposes for discussing service monitors (This includes but is not limited to Motorola, HP, Aeroflex, GD, etc). Additional topics allowed include test procedures, interpretation of test results, where to find information about specific tests, antenna VSWR, return loss testing, duplexer and filter alignment, etc.

Moderator: Queue Moderator

Post Reply
Tech255
New User
Posts: 27
Joined: Sun Mar 26, 2017 4:51 am
What radios do you own?: Yaesu FT757 mk1 FT-726r FT101Z

IFR CPM20 frequency & power meter

Post by Tech255 »

I have purchased one of these units it does all seem to be working well however the oxco is slightly off frequency, i have found the control for this on top of the oxco and also the calibration output control for the for the power meter ref but do not want to just adjust them in case theres a specific procedure to follow.
Adding a 10mhz signal to the rear from a GPSDO does make a dramatic difference however i do like to use this thing portable so would be good to get it as close as i can on the oxco.

Can anyone help with this procedure

Does anyone have a service manual they would like to part with ?.

Thanks
Top
Post Reply

Return to “Test Equipment & RF Equipment Alignment”