Mototrbo Scan Issue
Moderator: Queue Moderator
-
- New User
- Posts: 6
- Joined: Thu Feb 02, 2012 1:06 pm
Mototrbo Scan Issue
I am experiencing a scan issue across multiple radios that has me pulling my hair out. I have several subscriber radios (portables and mobiles). Among the several channels programmed are two tactical channels: one channel is freq 460.xxxx CC 9 on TS 1 on a repeater with RAS enabled. RAS is verified to be enabled with the correct key. The other channel is same freq and CC, but in TS 2. When scanning, if a transmission occurs on the channel using TS 1, the receiving radios hear the transmission just fine. When a transmission occurs on TS 2, it’s as if the Scan List ignores the transmission completely. Both channels are included in the Scan List. If you take the receiving radio(s) out of Scan mode, it hears the transmission just fine. What am I missing here???