HT1000 2.5mhz Bandwidth
Moderator: Queue Moderator
- RadioMan1101
- Posts: 14
- Joined: Fri May 30, 2003 10:02 am
HT1000 2.5mhz Bandwidth
Our PD has installed a repeater system and the frequencies are in the 2.5mhz bandwidth. M1225's program up fine but the HT1000's wont. I believe it's because of the version of RSS we have (2.00.00). It keeps wanting to "round off" when you try to enter 153.7925mhz. I guess my question is do we need to get a newer version of RSS?
- The Pager Geek
- Posts: 1250
- Joined: Fri Jun 21, 2002 10:31 pm
- What radios do you own?: Disney FRS
- rrfd43
- Posts: 434
- Joined: Wed Mar 06, 2002 4:00 pm
- What radios do you own?: Cobra 25 LTD Classic with echo
yes, as the Geek says...I had the same problem. I could only get the "D" versions to take this new channel. The "d" versions have a more selective rf end. There should be a thread on here about this same issue that I started some time ago. Nand gave the answer in tecnical terms. I was able to round up to the nearest freq. to use them to recieve and they work "OK".
- RadioMan1101
- Posts: 14
- Joined: Fri May 30, 2003 10:02 am