GTX Portable HELP!

This forum is for the discussions targeted at converting various models of Motorola equipment to operate in the 900MHz Amateur Band.

Moderator: Queue Moderator

Post Reply
User avatar
Big BOB
Posts: 188
Joined: Tue Sep 04, 2001 4:00 pm

GTX Portable HELP!

Post by Big BOB »

I have a GTX portable that had 3 trunked channels in it. I programmed 2 new conventional channels @ 902/927. During programming it shows "r55" is that normal? All the reading and writing seems to go OK, no error messages. Then when I try to use the radio the only thing I have is 3 trunked channels. I have added the Modes. Why are these new channels not appearing on the display or functioning?
Top
User avatar
ARZ902
Posts: 100
Joined: Sun Mar 03, 2002 4:00 pm

Post by ARZ902 »

Did you enable the new channels?
Dennis

How do we know the sky isn't really green and we're just color blind?
Top
User avatar
Big BOB
Posts: 188
Joined: Tue Sep 04, 2001 4:00 pm

Post by Big BOB »

Yes, the RSS says the Personality Enabled. I even went in and deleted 2 of the trunked channels and now the only channel that shows on the display is "1C". The software shows 10 personalities, one is trunked the others say conventional.
Top
walt10
Posts: 81
Joined: Sun Sep 09, 2001 4:00 pm

gtx900

Post by walt10 »

Silly question, But you do know that you use the arrow keys to change the conventional channels?
Walt
Top
Post Reply

Return to “Converting Motorola Equipment to 900MHz Amateur”