DC Remote question
Posted: Thu Dec 29, 2011 8:01 pm
So .. I have my 5 channel CEB using DC Remote BIMS..
I have a VHF channel and a UHF Channel (in this thought process).. Both controlled by their respective bims (DC BIM / Termination panels)
This seems silly, but would be great if i could do this-- -I want to disconnect the VHF Channel from the CEB and punch it down parallel to the UHF Channel...
So that it is permanently patched.. The VHF has far more power then the uhf and would be great if they were permanently patched for fire paging purposes as we no longer place vhf radios into the field.. (Also need that BIM Space for another channel)
VHF is simplex.. UHF is thru repeater.. Other option is to get a rick and connect to the MCS2000 from what ever UHF i have floating around.. (I know i will do some soldiering in that config)
So main question is can it do it? and what impacts would i have if i did put the wires in Parallel??
I have a VHF channel and a UHF Channel (in this thought process).. Both controlled by their respective bims (DC BIM / Termination panels)
This seems silly, but would be great if i could do this-- -I want to disconnect the VHF Channel from the CEB and punch it down parallel to the UHF Channel...
So that it is permanently patched.. The VHF has far more power then the uhf and would be great if they were permanently patched for fire paging purposes as we no longer place vhf radios into the field.. (Also need that BIM Space for another channel)
VHF is simplex.. UHF is thru repeater.. Other option is to get a rick and connect to the MCS2000 from what ever UHF i have floating around.. (I know i will do some soldiering in that config)
So main question is can it do it? and what impacts would i have if i did put the wires in Parallel??