Batboard

I have an XTL5000 with a flash code of 580208-001C80-9 and in that is G182 Radio Control Protocol. I am trying to add S/W BAsed ADP to this radio and I'm being told by my vendor that Motorola says that this radio cannot have G182 in it so it must not be an XTL5000???? I figured I would ask here and see what the experts thought.

Model # M20SSS9PW1AN

G806 G806 ASTRO IMBE Digital Operation
G114 G114 Enhanced Digital ID Display
G298 G298 Hardware Multikey Encryption w/ OTAR
W12 W12 Preamp
G51 G51 SmartZone Systems Operation
W947 W947 Packet Data Interface
G173 G173 SmartZone Omnilink MultiZone Operation
G182 G182 Radio Control Protocol
G361 G361 ASTRO 25 9600 Baud Trunking

They're probably whining because it has hardware multikey in it. Do you have a UCM installed as well?

Software ADP requires disabling any hardware crypto that is present - it's an either/or option under the Secure settings. The two flashcode options will coexist, but you can't use both simultaneously. The good news is that, if you can afford it, you can have hardware ADP added to your UCM and manage the keys with your appropriately flashed KVL3K+ or KVL4K and be fully interoperable with software ADP.