Hello all
Was wondering if anyone knows if adding MODAT signaling to a XTS3000 would degrade the TX audio on analog channels? Was told by someone that read from reliable sources that that would happen especially of the radio had newer firmware.
Thanks
Dave
MODAT on an XTS3000
Moderator: Queue Moderator
-
- Posts: 1652
- Joined: Wed Apr 02, 2003 10:35 am
- What radios do you own?: APX XTS XTL TRBO 900MHZ
Re: MODAT on an XTS3000
One of my Astro Sabers has the old Nick whore flash which includes Modat, as well as the most recent firmware, & there is no problem with my tx audio. The only "problem" is that one freq has to have Modat enabled, so I assigned that to a freq I hardly use. GARY
- FireCpt809
- Posts: 1848
- Joined: Sat Jan 19, 2002 4:00 pm
- What radios do you own?: Alot..
Re: MODAT on an XTS3000
i did the same I just put the Modat on a personality and assigned it to a last channel of a zone that is not used
-
- Posts: 245
- Joined: Sun Sep 16, 2001 4:00 pm
- What radios do you own?: HT1550, XTS3000, XTS5000
Re: MODAT on an XTS3000
I used to have some Astro Sabers that had MODAT in them and never seemed to have an issue with them either on analog channels. A fellow board member has it right now doing a Firmware and Flashcode update and said he had read from a reliable source that it caused TX issues on 3000's with newer firmware.
That's why I posted it here to see if anyone has any experience or knowledge of that.
Thanks for the other replies.
Dave
That's why I posted it here to see if anyone has any experience or knowledge of that.
Thanks for the other replies.
Dave
Re: MODAT on an XTS3000
Thats correct. MODAT is only properly supported in earlier releases of the firmware. If enabled on personalities running R07.whatever, the TX audio will be much more bassy, though IMHO perfectly usable. Some complain it's too "muffled".
Too bad there aren't any more hardware ID decoders around.
Too bad there aren't any more hardware ID decoders around.
-
- Posts: 433
- Joined: Sun Sep 09, 2001 4:00 pm
Re: MODAT on an XTS3000
I need to have my XTS3000 firmware updated who are you using and what are they charging per firmware upgrade>MTS2000 wrote: A fellow board member has it right now doing a Firmware and Flashcode update.
***********************************
I hate arguing with stupid people. They just bring you down to their level and beat you with experience.
I hate arguing with stupid people. They just bring you down to their level and beat you with experience.