I picked up a used Zetron Model 27 Receiver Monitor that I want to connect to multiple scanners via the external speaker jacks on the back of the scanners.
Anyone have an installation manual for these or experience with them?
My end goal is to use the Model 27 for the main speakers for the scanners, but also tie each scanner into a Centracom Gold Elite for remote access to them.
Zetron Receiver Monitor
Moderator: Queue Moderator
-
Bigred
- Posts: 101
- Joined: Mon Apr 14, 2008 7:08 pm
- What radios do you own?: Junk that comes and goes...
Re: Zetron Receiver Monitor
Pretty simple speaker panel. Stereo amp and two speakers, four mixed inputs per side. All the needed info is silk-screened on the back. If you need cross mute you'll have to play with the inputs to figure it out but easy enough.
Lots and lots of watts...
Re: Zetron Receiver Monitor
I have a soft copy of the manual I can e-mail to you.
Re: Zetron Receiver Monitor
Any chance of getting a copy of the manual? I realize this post is over 3 years old.
Re: Zetron Receiver Monitor
PM me your e-mail and I'll send it along.pfd radio wrote:Any chance of getting a copy of the manual? I realize this post is over 3 years old.