T73KXJ7J04BK
13/10 ... I'm stumped - anyone?
Syntor X9000 error code
Moderator: Queue Moderator
-
- Posts: 128
- Joined: Wed Jul 07, 2004 8:36 am
Re: Syntor X9000 error code
VRS enabled and not present?
-
- Posts: 128
- Joined: Wed Jul 07, 2004 8:36 am
Re: Syntor X9000 error code
That's 12/10 and its not enabled - I went through the codeplug and tried to make it as vanilla as I could and I still get the 13/10
Re: Syntor X9000 error code
Info I found indicates VRS issues for 12 and 13
-
- Posts: 128
- Joined: Wed Jul 07, 2004 8:36 am
Re: Syntor X9000 error code
hmmmm - the radio did not have a VRS but did have this box attached that contained a crystal controlled receiver, 2 antenna relays and a duplexer - similar in function to what the Flexar repeater uses. I get the 13/10 error if it's connected or not - I don't believe the codeplug was molested before I got it (PA state police).
VRS was not enabled in the codeplug, I did try enabling it and it spit out the 12/10 error, so whatever this box is, it's not recognized as a VRS
On the control head there is a button labeled 'rptr', but it doesn't do anything.
When I read the control head with the RSS, the button assignment displays ???? and there is no 'rptr' option to choose.
I have a few of these and they all behave exactly the same so I'm not thinking it's hardware related.
VRS was not enabled in the codeplug, I did try enabling it and it spit out the 12/10 error, so whatever this box is, it's not recognized as a VRS
On the control head there is a button labeled 'rptr', but it doesn't do anything.
When I read the control head with the RSS, the button assignment displays ???? and there is no 'rptr' option to choose.
I have a few of these and they all behave exactly the same so I'm not thinking it's hardware related.
Re: Syntor X9000 error code
Reassign that button yet?hamptonbeach wrote:hmmmm - the radio did not have a VRS but did have this box attached that contained a crystal controlled receiver, 2 antenna relays and a duplexer - similar in function to what the Flexar repeater uses. I get the 13/10 error if it's connected or not - I don't believe the codeplug was molested before I got it (PA state police).
VRS was not enabled in the codeplug, I did try enabling it and it spit out the 12/10 error, so whatever this box is, it's not recognized as a VRS
On the control head there is a button labeled 'rptr', but it doesn't do anything.
When I read the control head with the RSS, the button assignment displays ???? and there is no 'rptr' option to choose.
I have a few of these and they all behave exactly the same so I'm not thinking it's hardware related.
-
- Posts: 128
- Joined: Wed Jul 07, 2004 8:36 am
Re: Syntor X9000 error code
I did, to unassigned