Page 1 of 1

Moto xpor 4550 issue in programming

Posted: Tue May 12, 2015 11:04 am
by w6krp
i have a moto 4550, it has a code plug that was loaded with all the info in it, i want to re-arrange the zone liust to better suit my uses.
i have read the radio
i have opened the channel list
i have dragged and dropped the zones into the numbered sequence that i want them in
i have wrote it to the radio
it states the write was successful
the radio power cycles
and then no changes were made
i go back a read the radio and all of the changes i made come up in that re read
but the radio has not made the chnages
any one have a clue ?

thanks

Re: Moto xpor 4550 issue in programming

Posted: Tue Jun 02, 2015 12:48 am
by 35-K9-1
If it's anything like my XPR2500, the zones are automatically organized alphabetically. I have not found a way around this yet. Maybe you can number your zones in the order you want them?? I have just learned to live with it.

Re: Moto xpor 4550 issue in programming

Posted: Fri Jun 05, 2015 9:49 pm
by oldradionut
Number ahead of zone name will cause the radio to stack them in numerical order. Not sure what happens when you go over 9 zones. I know this works on a 6550, should be ok on a 4550. Both are Gen 1 radios.