Batboard

Hello all. I have a Zetron 37 Controller and 2x CDM1250 UHF Radios and of course a duplexer. I am not getting any CTCSS Tone Transmitted with the Repeater TX radio . I went through all the settings in the CDM and The OTA Programming on the Zetron. I reset the Zetron and started over several times with no success.

Any help would be appreciated.

Under 'Radio Configuration' make sure 'Enable Flat TX Audio' is not checked on the 'Option Board' tab.

On the 'Accessory Configuration' tab what are your audio sources set at? I believe 'Ext. PTT Audio' should be set to 'Ext Mic & Flat TX'.

That did it thanks jackhackett.