CP ERROR CODE

[yardbirdjr]

Hello all!

I need a little help

I have a VHF CP200XLS and I can read the radio fine with CPS.

When I go to write to the radio the CPS gives me the following error code.

The ERROR CODE is 2440

It says something about narrowbanding. I have all the channels set to 12.5 but the radio still will not program.

The same thing happens with my UHF CP200XLS as well.

Any help would greatly be appreciated

Thanks

David

[SteveC0625]

Hello all!

I need a little help

I have a VHF CP200XLS and I can read the radio fine with CPS.

When I go to write to the radio the CPS gives me the following error code.

The ERROR CODE is 2440

It says something about narrowbanding. I have all the channels set to 12.5 but the radio still will not program.

The same thing happens with my UHF CP200XLS as well.

Any help would greatly be appreciated

Thanks

David

Go into the trunking section. Delete all but one of the repeaters, and then make sure that repeater is set to 12.5. Should fix it for ya.

[yardbirdjr]

Thanks

I will try that

David