MCS2000 firmware upgrades
Moderator: Queue Moderator
MCS2000 firmware upgrades
I am curious, did the MCS have an upgrade "kit" like the Waris series, also can the same flash adapter be used to put it into programming mode? if so where can I find the pin-out for the RIB to accessory cable?
-
- Posts: 66
- Joined: Mon Jun 01, 2015 6:14 pm
- What radios do you own?: APX6000, APX7000, Quantar, XPR
Re: MCS2000 firmware upgrades
The MCS2000 uses a SmartRIB, a flashkey, and a CVN file. Latest firmware is R08.??
So far no one has found any other way around this aside from making a UniRIB and flashing it into a European model
So far no one has found any other way around this aside from making a UniRIB and flashing it into a European model
Re: MCS2000 firmware upgrades
Thanks, I was just curious, got a short stack of these recently, they are running 5.6 so at least they are not too far behind, will probably do whatever is needed of them.
-
- Posts: 66
- Joined: Mon Jun 01, 2015 6:14 pm
- What radios do you own?: APX6000, APX7000, Quantar, XPR
Re: MCS2000 firmware upgrades
Yeah mine are actually around the same version. They're mid power UHF S split ones and I've had no problems at all with them. You should be fine with that firmware revision.