programming a Visar HO5UCD6CB1AN with a conventional channel
Moderator: Queue Moderator
Forum rules
Share your enhancements here! What is not permitted is the discussion regarding adding features (aka flash options) which you can still purchase from Motorola for current subscriber products including discussion regarding Depot on current products.
Share your enhancements here! What is not permitted is the discussion regarding adding features (aka flash options) which you can still purchase from Motorola for current subscriber products including discussion regarding Depot on current products.
-
- New User
- Posts: 2
- Joined: Wed Jan 28, 2009 8:12 pm
programming a Visar HO5UCD6CB1AN with a conventional channel
Hi guys, I found a couple of visars (HO5UCD6CB1AN Type II trunking radios) and I am wondering if these radios will take a conventional channel or will they take only trunking talkgroups? I have not play with that software in at least 10 years, I thank you in advance for any advice.
Re: programming a Visar HO5UCD6CB1AN with a conventional channel
Requires RVN-4123 Visar Privacy Plus DOS based programming software and is trunking only.
Regards
Allen
Regards
Allen
Re: programming a Visar HO5UCD6CB1AN with a conventional channel
In my experience generally speaking any radio that will do(insert type)trunking will also do conventional
fineshot1
NJ USA
NJ USA
- N4DES
- was KS4VT
- Posts: 1233
- Joined: Thu Dec 25, 2003 7:59 am
- What radios do you own?: APX,XTS2500,XTL2500,XTL1500
Re: programming a Visar HO5UCD6CB1AN with a conventional channel
Allen is correct that the trunking Visar will not do conventional.
I have a Type II Visar that I used from time to time prior to rebanding and it does not do conventional.
I have a Type II Visar that I used from time to time prior to rebanding and it does not do conventional.