Page 1 of 1
R2024D
Posted: Tue Mar 10, 2020 4:10 pm
by wcu02mpa
Good evening. I am looking for some info on what the differences are in the R20xx series of CSM units. I am quite familiar with the R2600 series. I have a chance to buy a nice R2024D unit and am wondering what options this may have in it based on that number. Thanks
Re: R2024D
Posted: Wed Mar 11, 2020 5:16 am
by jry
that has the encryption /secure board ( check the battery for corrosion ) and remote options.
Believe the later version of the remote board was RS-232 /HP-IB so could go either way.
This also means it has the electronic ( relay ) attenuator which was preferable IMHO to the standard mechanical one
Should have a printer port ( five pin DIN ) on the side if it has the later version processor board.
Lots of info on repeater builders.
Re: R2024D
Posted: Mon Mar 16, 2020 11:19 am
by wcu02mpa
Got it and the thing actually works really good. The rear cooling fan is a bit noisy. Can you recommend a good replacement part number for it?
Thanks
Re: R2024D
Posted: Mon Mar 16, 2020 11:31 am
by jry
its a standard part ...brushless DC 12VDC ...look up the orig and try to match the CFM rating.