IFR2975 keyboard error

This forum exists for the purposes for discussing service monitors (This includes but is not limited to Motorola, HP, Aeroflex, GD, etc). Additional topics allowed include test procedures, interpretation of test results, where to find information about specific tests, antenna VSWR, return loss testing, duplexer and filter alignment, etc.

Moderator: Queue Moderator

Post Reply
kf4eok
New User
Posts: 1
Joined: Tue Sep 27, 2016 3:28 pm

IFR2975 keyboard error

Post by kf4eok »

When I boot my Areoflex IFR2975 it comes up with a Keyboard error or no keyboard present.

Press F1 to continue, or DEL to enter SETUP

I have a PS2 keyboard plugged into the lower port on the back of the unit just below where I have the mouse plugged in.
Once I press F1 the unit boots as it should and operates as it should.
Is there a way to get rid of this error? Do I need a different keyboard for this unit?
Thanks for any ideas to resolve this error.
VE2VXT
Posts: 5
Joined: Thu Jan 25, 2007 11:13 am
What radios do you own?: List is too long...

Re: IFR2975 keyboard error

Post by VE2VXT »

Hello Daniel,

One of our test-set in the shop react like the one you have.
Did you found something?
I've tried to connect a USB keyboart with an adaptor and nothing happen.
Hit the help button help to start booting but stop somewhere before the end.

Thanks
Eric
Post Reply

Return to “Test Equipment & RF Equipment Alignment”