Radius CP50 - can't locate R417 jumper for removal.
Posted: Tue Jan 30, 2024 11:26 am
Hi all,
I'm working with a Radius CP50 and I've found the information about needing to remove the jumper R417 for full unlocking of keypad. I even tracked down the schematics which show the location on a VHF model.
When I opened up the CP50 UHF, I noticed my board is different.
Does anyone know where it would be located on my UHF model?
https://imgur.com/qK8ejba Manual
https://imgur.com/fZnOLi6 My radio
Thanks,
Dmitriy
I'm working with a Radius CP50 and I've found the information about needing to remove the jumper R417 for full unlocking of keypad. I even tracked down the schematics which show the location on a VHF model.
When I opened up the CP50 UHF, I noticed my board is different.
Does anyone know where it would be located on my UHF model?
https://imgur.com/qK8ejba Manual
https://imgur.com/fZnOLi6 My radio
Thanks,
Dmitriy