error code 01/42 after cloneing with CPS vers 292.0

Release notes for new versions of programming software and firmware, for any product, should be posted here, as well as topics discussing issues and bugs with and FSB's/SRN's for particular releases.

Moderator: Queue Moderator

Post Reply
cbroseinak
Posts: 66
Joined: Mon Nov 21, 2011 12:01 pm

error code 01/42 after cloneing with CPS vers 292.0

Post by cbroseinak »

Received a new batch of XPR 2500 radios and tried to clone a CPS 122.0 file into a new XPR2500 that requires the 292.0 software. When the radio boots up it
briefly shows a 01/42 error code. How do I clear that? or do I have to take another new radio and build a new profile from scratch?


Ok, so I just decided to start from fresh using another of the new radios as a master and just copy and pasted Zone config whihc is all I need for this customer.
The web info I got mentioned firmware upgrading, etc., to clear the error code, but screw dat.
Top
Post Reply

Return to “Software & Firmware Releases & Issues”