Page 1 of 1
circulator?
Posted: Mon Mar 24, 2003 9:46 am
by Dan K
I Have a Micor Compa Station. I am only useing the power supply rack and PA. What I'm trying to do is to cut down the PA power from 100watts to 50watts I removed the Micor circulator and I installed it in line but where do I supply the power to it and how much???
Circulator
Posted: Tue Mar 25, 2003 7:31 am
by Hartley
Hi Dan,
A circulator is not powered -it is a passive device. If there is wiring, it is likely power metering or some such..
73 DE Hartley
circulators
Posted: Mon Apr 21, 2003 1:21 pm
by KB0HFX
A circulator is a passive device usually combined with a 50 ohm load, mostly for 2 uses in multicoupled systems to keep other transmitters power out of the PA or as a fall off device IE the antenna could fall off the tower and the transmitter would never know it. What you need is an attenuator to go between the exciter and the input of the PA. In a perfect world you would need a 3 DB attenuator to cut your drive power in half and the output would be half theoreticly. Whats your input power to the PA? The preffered way would to be turn the output of the exciter down.
Laterz
Austin
KB0HFX