Batboard

Hello,

I want to modify a 800 Mhz Trunking Maxtrac and modify for 902 Mhz for a Receiver. I need to know what the Firmware # is for a Maxtrac 800 Conventional. I know that FVN 4019A is used for a 900 Mhz Maxtrac, But what is the # for 800 Conventional.

Thank You
N6vgu

HLN9277A VHF/UHF/800 Conventional w/5 pin logic board
HLN5569A VHF/UHF/800 Conventional w/16 pin logic board

Also see this thread;
http://batboard.batlabs.com/viewtopic.p ... highlight=