I've got a radio drawer that identifies itself as a "SMARTNET" radio...
I can't find anyplace that can identify it by model#, so I figured I'd put it out here...
From left to right on the front of the drawer it has: Type "n" connector, key, removal handle, and then it has a plate who's top row has a 16pin IDC type connector, then the power connector. Below those is a DB25 Male connector...
The model is: T37CPA5GD9BH
If you know anything about it, I'd like to know if a: it's capable of conventional modes, b: if it can be used without a control head...
Thanks,
-Head
Anyone know what this thing is?
Moderator: Queue Moderator
Thanks,
I'm going to have to track down the pinout for the front connector and such. It's got an RJ45 connector inside of it, which I hoped would be the place to try to program it, and it didn't work... Either it's going to need a control head, or that just isn't the place...
Thanks for the info,
-Head
I'm going to have to track down the pinout for the front connector and such. It's got an RJ45 connector inside of it, which I hoped would be the place to try to program it, and it didn't work... Either it's going to need a control head, or that just isn't the place...
Thanks for the info,
-Head