Batboard

Posted: **Sun Jan 18, 2004 7:34 pm**

is there any way to convert a mtx9000 to a mtx 8000 or get it to work on 800.xx freqinces

Posted: **Sun Jan 18, 2004 9:26 pm**

Yup.

Just replace the 900MHz RF board with an 800MHz RF board, and dump in an 800MHz codeplug into the radio. Not too difficult at all.

-Mike

Posted: **Mon Jan 19, 2004 6:41 pm**

And if you want, contact me and i'll trade you the 900mhz board for an 800mhz board straight up