Batboard

Wanted:

Need 3-4 old amphenol microphone plugs / connectors with 6-pins. Please see the following photo of the chassis mate. I have an old MX style mic that has one. Are these still available? Anyone have a few in their junque drawer???


Thanks!

Steve

I have two right in front of me. They are on a couple of RCA 500 mics.
Are you sure the mic you have is an MX? I have never seen that type of plug on a MX type mic. But the packset mic (PT100,200, 300) looks similar. And the Pt used that same plug. So did the REPCO and RCA pacsets. (also made by ITEK).
I might have a couple more of these, I will look if you want them.
So far I have these two for sure.

Hello PETNRDX!

Thanks for the reply! Yes, the mic I have is the MX type mic with this connector on it. I was going to photograph it too and post it, but haven't had the time. If you have any to spare, it would be greatly appreciated. Please keep me posted.

Thanks again!

Steve

On the mic. topic , but sort of off.
Is there a supplier that carries old Amp
mic connectors? I have been looking for a while
for a connector for a 664 Electrovoice/ Shure mic.
I really like how these things sound. Was state of the
art PA mic in the 60's.
J.B. AD6WX

lemme guess.. one of the suitcase repeaters?

I recall that the PT type radios used a 4pin connector, the same type as used for the Mocom70/Motrac/etc..