Page 1 of 1
CM300 Question
Posted: Fri Feb 27, 2004 2:27 pm
by Donnie5063
I couldnt find anything on this by searching either so i'll ask. Does the CM300 mobiles and the CP200 portables use the same RSS? Anymore tips about the CM300 cable yet? Thanx, Donniezle
Posted: Fri Feb 27, 2004 8:06 pm
by Al
RVN4191 - E is the latest revision - programs the CP150, CP200, PR400, CM200, CM300, and PM400 radios.
Posted: Sat Feb 28, 2004 5:44 am
by Donnie5063
thanks!
Program cable for CM 200 or 300
Posted: Sat Feb 28, 2004 6:44 pm
by dalej
Use the rib to maxtrac/radius/gm300 cable and then jumper the rj45 mic plug from pin 1 to pin 3
This supplies the B+ of the radio to pin 3 of the mic jack to alow programing.
I have built several of these and they work fine.
I have sent this info to batlabs so that maybe they can put it in there list.
Posted: Thu Mar 18, 2004 7:27 am
by RADIONET
Are you shure about this change ?
I looked the schematics and this jumper does not look right .
Tks
Posted: Wed Aug 02, 2006 5:17 pm
by Pump3
Does anybody have any pics to illustrate what is meant by jumpering the pins?