Page 1 of 1
Trying to read a GTX900 portable codeplug
Posted: Sun Mar 28, 2004 6:49 pm
by w7com
I'm trying to read a H11WCD4CB1AN with RSS for the GTX/MAX638 version R02.00.02 and the "GTXLAB" version R01.01.00 and keep getting an error 21, radio not supported. I see the model numbers in the .mdf file so I'm not sure what's wrong here. The computer is a 286 @ 12MHz running DOS 6.20. The aftermarket RIB works on everything else I have (Spectras, Genesis, Maxtracs, STX, etc.) so I don't think it's hardware.
Any clues what I should try next? I'm guessing that this is a good radio since it does tx on ham 900MHz freqs now and I got it from WillBartlett.
Posted: Sun Mar 28, 2004 8:07 pm
by MSS-Dave
My guess would be that Will used RSS version 4.00.00 or .01 to program it. Try going to the setup screen from the main menu (F9) and try the comm test. If that passes, it's a RSS issue and you'll have to upgrade it to the 4.00 series and hack that .mdf file to read/write to it.
Dave
Posted: Sun Apr 04, 2004 6:22 am
by w8iss
MSS-Dave wrote:My guess would be that Will used RSS version 4.00.00 or .01 to program it. Try going to the setup screen from the main menu (F9) and try the comm test. If that passes, it's a RSS issue and you'll have to upgrade it to the 4.00 series and hack that .mdf file to read/write to it.
Dave
We had to go to a rss of 6.x.x to read/write to my handheld a few weeks ago. We tried rss's of 4.x and 5.x, but they didn't work for us.
Plus you have to have the properly edited gtx.mdf file to do it.
Now she transmits on 902 and received around 927mhz and up plus all the other talk-arounds.
James W8ISS
Posted: Fri Apr 30, 2004 8:00 pm
by Seth
w8iss wrote:MSS-Dave wrote:My guess would be that Will used RSS version 4.00.00 or .01 to program it. Try going to the setup screen from the main menu (F9) and try the comm test. If that passes, it's a RSS issue and you'll have to upgrade it to the 4.00 series and hack that .mdf file to read/write to it.
Dave
We had to go to a rss of 6.x.x to read/write to my handheld a few weeks ago. We tried rss's of 4.x and 5.x, but they didn't work for us.
Plus you have to have the properly edited gtx.mdf file to do it.
Now she transmits on 902 and received around 927mhz and up plus all the other talk-arounds.
James W8ISS
Where in the world did u get all of those from??
KC7NOA
Trying to read a GTX900 portable codeplug
Posted: Sat May 01, 2004 8:40 am
by w8iss
A friend of mine is a radio repair tech for some of the local Fire/Police Dept.
He had the proper software for doing it.
I got a modified gtx.mdf file from another ham that we used with his software
to do the programming of both the HT and Mobile which I think is on the ar902
yahoo group file site now.
Now to get the Repeater on the air so that I have someone to talk to other than
myself. Thank goodness Dayton is in two weeks. I need to find a controller and
antenna(s).
James W8ISS
Posted: Sat May 01, 2004 10:16 am
by Seth
hey.. good,
and goodluck getting some one else on the air.... on 900 that is
iv already got 3 other hams in my area interested...
but i dont have a 900Mhz repeater... but have a 440 coming..
900 is next... still wonder if a gtx800 will recive in the lower end of 900..
KC7NOA Spokane Wa area
900 freq info for Dayton 2004
Posted: Sun May 02, 2004 1:43 am
by drsm0ke
DAYTON 900 (2004) mhz repeater INFO
927.4875 902.4875 131.8 PL, but any PL will work with repeater
927.6875 902.6875 141.3 PL
927.9125 902.9125 186.2 PL
927.9875 902.9875 131.8 PL & DPL 073
927.5000 Simplex 151.4 PL (Calling Ch)
927.9125 Simplex 186.2 PL
927.8125 Simplex 023 DPL
927.8625 Simplex 703 DPL
These are known to be good at time of writing.
73
DrSm0ke
AKA: bob brown, n0euh