Page 1 of 1
Codeplug for Radius mobile 33mhz range
Posted: Fri Nov 12, 2004 6:27 am
by stangmansvo
Hello everyone,
Im looking for a good codeplug for a M208 (6ch) and M216 (16ch) radius mobile radios. Both of my radios wont program for some unknown reason.
Must be D51 model and one 6ch the other 16ch
thanks
steve
Posted: Sat Nov 13, 2004 4:27 pm
by Will
Steve, need the rest of the model number.
Posted: Sat Nov 13, 2004 6:41 pm
by Max-trac
Are the radios working OK?
Can you read them?
If both just mysteriously have problems, it is more likely you have another problem. IE computer setup problem.
Are you using radmbl and not maxtrac software?
codeplug
Posted: Sat Nov 13, 2004 8:18 pm
by stangmansvo
yeah ! Seems crazy to me also
Im using radmbl and both are bad
steve
Posted: Sat Nov 13, 2004 8:25 pm
by Max-trac
Well, if the radios are working OK, then the codeplugs are probably OK.
So check you com port setup under F9, F3 (I think) from the main menu, and other computer hookups.
What is the error you are getting?
codeplugs
Posted: Sun Nov 14, 2004 5:01 am
by stangmansvo
Yeah the radios work OK! error code 56
Thanks
I will double check things
steve
radius codeplugs
Posted: Sun Nov 21, 2004 4:53 am
by stangmansvo
Well I finally got the radios programmed.
seems M100 works on these radios but m208 does not.
Go figure !!
steve
thanks all for your help