Posted: Tue Oct 09, 2001 11:13 pm
anyone know part numbers and what they look like?
i hear about them but no one knows about them
i hear about them but no one knows about them
Page 1 of 1
Posted: Tue Oct 09, 2001 11:34 pm
DO a search, this was brought up about a month ago with all the part numbers etc, unfort. I didn't right them down!
Posted: Wed Oct 10, 2001 5:20 am
These knobs are really just low-profile Saber parts which everybody uses if, note I say IF, you don't have to reach inside an SVA to change channels on your Saber, in which case the standard knob with the top that sticks up is much easier to use. For regular Sabers try part number REX4659 on the Motorola search engine. I don't know if the same exact mounting knob is used on Astro Sabers. The 4659 package from Motorola gets you two knobs, one with a white line on it and one with no white line - - all black - - as well as all the red, blue, and green shaft mounting adapters.
Tom in D.C.
Tom in D.C.
Posted: Wed Oct 10, 2001 6:48 am
Saber knobs are NOT the same as Astro Saber knobs. Neither will fit properly on the other radio. This applies to standard and low profile knobs.
The Astro low profile knob kit does not appear in the radio's service manuals. If you can't find it in a search, call Motorola, parts ID group, at 1-800-422-4210.
Elroy
The Astro low profile knob kit does not appear in the radio's service manuals. If you can't find it in a search, call Motorola, parts ID group, at 1-800-422-4210.
Elroy
Posted: Wed Oct 10, 2001 12:20 pm
The Part#'s for the Astro Saber low profile knob are as follow's
3604250j01-low profile (Vol)
3604250j02-low profile (Freq)
I hope this helps
Dave
3604250j01-low profile (Vol)
3604250j02-low profile (Freq)
I hope this helps
Dave
Posted: Wed Oct 10, 2001 1:56 pm
like the knobs on that radio?
<img src="http://tenarrus.com/kcdms/SaberFace001.jpg" border=0>
<font size=-1>[ This Message was edited by: Astro_Saber on 2001-10-10 17:56 ]</font>
<img src="http://tenarrus.com/kcdms/SaberFace001.jpg" border=0>
<font size=-1>[ This Message was edited by: Astro_Saber on 2001-10-10 17:56 ]</font>
Posted: Wed Oct 10, 2001 5:32 pm
Those knobs are generally similar, but there's no white line and the top of the channel low profile knob is slightly indented. For some reason I can't post a scan of a set of LP Astro Saber knobs.
What's the big deal, anyway? I've got two radios with the low profile knobs and the truth is that they suck compared to the regular knobs, but I'm too lazy to change them. I certainly wouldn't buy a set of them! With the standard knobs, you can check your volume and channel selection purely by feel, which is the point of their design. Much better.
Elroy
What's the big deal, anyway? I've got two radios with the low profile knobs and the truth is that they suck compared to the regular knobs, but I'm too lazy to change them. I certainly wouldn't buy a set of them! With the standard knobs, you can check your volume and channel selection purely by feel, which is the point of their design. Much better.
Elroy