MOTOROLA GTX ERROR E06....

magc06 · Post by **magc06** » Sun Oct 16, 2005 3:12 pm

Hi...

I Have three Motorola GTX Mobil Model M11UGD6CB1AN,

that have error E06 in screen...which I do?

Thanks

magc06 · Post by **magc06** » Mon Oct 17, 2005 6:52 pm

[img]
It wanted to thank for the Administrator of the forum, to the Moderators, the BatBoard Supporter, the 7964 users (including me), to take the time to help to understand my problem, to help me to solve my problem, to give so good advice me on which I must or I do not have to do with my problem... to all, thank you very much!

Thanks to his great aid, I am sure that I can manage to solve my problem and in a future can help others.

Thank you very much!!

Regards

Post by **wavetar** » Tue Oct 18, 2005 3:26 am

I have only seen the "E06" error message when someone has blanked the GTX board with LAB RSS. It will also continue to show the error if someone tried to force a SmartZone capable LTS/LCS2000 codeplug into a GTX. The firmware doesn't recognize the codeplug contents.

Do you have the regular version 4.00.01 GTX RSS, and if so, can you read the radios?

Todd

magc06 · Post by **magc06** » Wed Oct 19, 2005 1:58 pm

Hi...

Thanks for your time...

The E06 error, nonsingle appears when it works with GTX LAB. also appears when this programming the radius and sudden movement extinguishes or disconnects the radius of the R.I.B....also appears when somebody clone a radius with protocol LTR to a radius with Privacy Plus protocol or vice versa.

Either it solves the problem with the GTX.....I have software GTX LAB (thanks Lord) and on the other hand, they gave a file me of the LCS codeplug... uniting those two sources, manages to surpass this problem.

Regards