Mid power spectra codeplug needed

Rick Rock · Post by **Rick Rock** » Mon Jan 02, 2006 7:47 pm

I am in the process of converting an A5 mid-power analog into an A9, so I am looking for a codeplug for a T43KXA7JA9AK if anyone has one they're willing to share.

Will · Post by **Will** » Mon Jan 02, 2006 7:55 pm

Better to bitbang the one you allready have. There have been way to many Spectra's in my shop with severe 'code plug' problems. Even some with dead MLM's due to trying to force in the wrong codeplug information.

I do have a limited capability to fix some MLM's without the radio, saves on shipping costs. So if you are not up to the bit stuff, I could do it for you.

Rick Rock · Post by **Rick Rock** » Tue Jan 03, 2006 11:10 am

I've done the bit-banging per Batlabs instructions, but it still won't allow the s9000e head option in RW settings. MLM is 5.23.

Victor Xray · Post by **Victor Xray** » Tue Jan 03, 2006 12:25 pm

Hi Rick,

Just to confirm, you did change location 6060 to CD ?

jmr061 · Post by **jmr061** » Wed Jan 04, 2006 1:57 pm

Another thing is to make sure is that it wasn't a motorcycle radio. The command board in a motorcycle radio will not support and A9 head.

Jason

Rick Rock · Post by **Rick Rock** » Thu Jan 05, 2006 10:22 am

I know it's not a motorcycle radio, and I'm pretty sure 6060 was changed properly, but I won't be able to verify it until this weekend.

jmr061 · Post by **jmr061** » Fri Jan 06, 2006 6:22 am

Contact me on one of the messenger links below. I have a codeplug.

Jason