Page 1 of 1

SP50 & SP50+ channel conversion

Posted: Tue Jan 10, 2006 10:53 pm
by brandon75181
Maybe someone out there can help me. I need help converting some VHF Sp50 & Sp50+ 2 channel radios to 10 channel radios.

I have tried to understand the HEX code editor and it has not worked for me. Does someone else know how to get it to work? or fix the hex code so that it will think the 2 channel radios are 10 channel?

Any help greatly appreciated. I am needing to get this resolved ASAP!

Thanks Again,
Brandon

Posted: Wed Jan 11, 2006 2:28 pm
by stvnd53
Find your model # in the MDF.file(P3YQTOO2)The three numbers before it is what you want.( 22 OC 20).Change the OC to OE.Find model # P3YQTOOG2 ,Change the # (22 OE 20) make the OE read OC.
Not to worry about t5he checksum.

Posted: Thu Jan 12, 2006 7:18 am
by stvnd53
OOPS ! MODEL # SHOULD BE:P3YQT00B2

sp50 conversion

Posted: Fri Jan 13, 2006 9:38 am
by brandon75181
Will that model# work for the sp50+ and sp50 (compact and standard models)

Thanks, brandon

sp50 conversion

Posted: Fri Jan 13, 2006 9:40 am
by brandon75181
Will that model# work for the sp50+ and sp50 (compact and standard models)

Thanks, brandon

Posted: Fri Jan 13, 2006 11:43 am
by stvnd53
ENTER THE MODEL # OF YOUR RADIO.WHEN YOU READ IT TO RSS IT WILL BE THERE