Batboard

Hello all, I have an xts3000 UHF radio that is having a scan issue.

There is one channel in particualr that when the radio is out of scan RX fine, obviously the proper PL and freq and squelch setting.

However, When you put the radio in scan I can not rx the channel.

I have checked the parameters, I can't find anything set wrong.

It is in scan, set for unmute or mute, proper list etc.


Please help... Thanks, Rob-

You checked in RSS/CPS or thru the display?

I bet its really really simple that's overlooked..been there a few times myself.

If you want to send me your CP, I'll take a look for you

FMROB wrote:Hello all, I have an xts3000 UHF radio that is having a scan issue.

There is one channel in particualr that when the radio is out of scan RX fine, obviously the proper PL and freq and squelch setting.

However, When you put the radio in scan I can not rx the channel.

I have checked the parameters, I can't find anything set wrong.

It is in scan, set for unmute or mute, proper list etc.


Please help... Thanks, Rob-

Rob, did you ever get this working?? Iam having the same problems with my 3000....

hello
rob posted this for me b4 i joined here. i am still haveing the same problem with the one freq. we have not figuried it out yet. what i have done and it works for now is took the dpl out and run that channel in csq. hope this helps. kevin

BARNEY R wrote:hello
rob posted this for me b4 i joined here. i am still haveing the same problem with the one freq. we have not figuried it out yet. what i have done and it works for now is took the dpl out and run that channel in csq. hope this helps. kevin

Placing a frequency in with no pl/dpl woorks just fine, Iam using Digital CSQ.. still not working...

I can review your plug for you if you would like. Let me know.

Jason