Page 1 of 1
Flashing a Non-Digital AS3 UHF to a Digital AS3 UHF?
Posted: Sun Mar 19, 2006 2:23 pm
by RTFireguy
Basicly I want to turn a Non Digital AS3 that i bought into digital.
How hard is it and also what is needed?
Thanks all.
Posted: Sun Mar 19, 2006 2:33 pm
by jmr061
You have to have the host/dsp upgraded to support IMBE and then have the options you want flashed into it. Not too many people can do the host/dsp change. Good luck.
Jason
Posted: Tue Mar 21, 2006 2:57 am
by K8TEK
Your host needs to be higher then R04.00.00 and dsp needs to be higher then N / I 06.00.00 to support IMBE. (A or M DSP is analog only)
Posted: Tue Mar 21, 2006 10:34 pm
by Pj
For the most part, your stuck with going to your local MSS and ordering the IMBE FLASHport upgrade kit.
This will run you about $600ish for the software and shop time for them to load the software into the radio. When this is done, the flash kit will upgrade your firmware.
Posted: Wed Mar 22, 2006 12:06 am
by RTFireguy
Damn.