Batboard

I'm planning a new install for my explorer using a couple of Saber SVA's mounted in the rear with extended cables to bring the Control head Mics up to the front center console. I have a couple of concerns that i'd like to get opinions on..

How do you change the channel the radio is on with an SVA control mic? I don't see a knob on it in the pictures i've seen. If there isn't a way to change the channel as one normally would, is it possible to set the radio up for keypad-only operation without using the top knob?

Thanks!

You will have to select " channel only operation " in the feature menu.
By doing this is makes the radio a 1 zone keypad selectable channel operation. One other thing you might consider is audio. Either use a speaker that will be near you that has an adjustable audio level , so you can turn it up and down. A second one would be to chop another convertacom up and use the control panel from it... and wire it into the remote unit, and just mount it in a little box or something similar. That would give you volume, rat butons etc.