Page 1 of 1
Posted: Mon Oct 15, 2001 2:24 pm
by colarc
I am trying to figure out what mods if any need to be made for a mocom 70 reciever to recieve in the vhf ham band.
<font size=-1>[ This Message was edited by: colarc on 2001-10-15 18:31 ]</font>
Posted: Tue Oct 16, 2001 2:56 am
by Monty
Hi:
As you may or may not know, the Mocom 70's
did come in a few ranges.
The 136-174 Mhz range would be ideal for Ham
Service, and even the 150.8-174 Version will work and those were used on the High-Power models. D53 ext...If you have one of these versions, you can either add or replace a few
Caps and it will bring in right into your range.
Anyhow, I did make a pair of them work
for a local Mex Repeater on El Diablo, and
as far as I know they still work today. They
are a pretty old radio, but they tend to live
longer in rough enviroments where lightning
is a problem.
May not give super receive performance, but
when there is no access for 2-3 months out of the year, they do not cost much to replace
or service.
For some reason, Maxtracs / Radius Mobiles
just do not tend to live above 9000/10,000'
AGL
MS