Batboard

Posted: **Mon Jun 12, 2006 3:44 pm**

I am looking for a MT2000 VHF codeplug that will work with R.06.00.00.

kb0uxv@aol.com

Thank you!

Posted: **Mon Jun 12, 2006 6:35 pm**

The model # is HO1KDD9DB4AN if that makes any differance...I have little experience with MT2000s.

Posted: **Mon Jun 12, 2006 7:20 pm**

Also, this is a MTX 838. I decoded the model number and just realized the PRIMARY SYSTEM TYPE is "PRIVACY PLUS"

I need this for conventional channels, I hope this radio can be programmed for conventional frequencies?

Any and all help is appreciated!

Posted: **Mon Jun 12, 2006 8:01 pm**

i thought the mtx838 was an 800 meg radio? not vhf

Posted: **Mon Jun 12, 2006 8:14 pm**

This one is 136-177 mhz 99 channels with the continuous rotary knob. Doing some searching in these forums it looks like this model was made outside the US for Canadian and Australian markets?

Posted: **Mon Jun 12, 2006 8:30 pm**

I have had a lot of the VHF MTX838's from Australia. I also have some UHF units that I'm working on for a friend. Most of the top display units are 99 channel, some are 255. Even on the 99Ch units you can still program in 255 personalities, but you can only assign 99 modes. Most of the time they don’t have any signaling. I like the continuous rotary channel selector.

Jim.

Posted: **Mon Jun 12, 2006 8:33 pm**

Jim,

Dont suppose you could get me a VHF codeplug? Also, since my radio model number indicates privacy plus will I be able to put conventional frequencies in it?

Thanks!

Posted: **Mon Jun 12, 2006 10:29 pm**

I got a codeplug and all questions are answered. Thank you!

Posted: **Mon Jun 12, 2006 11:43 pm**

The UHF 838s sold in Australia can do MDC-1200 PTT-ID and emergency. Not sure if they can do anything else though.

Posted: **Mon Jun 19, 2006 11:31 am**

Dear Jim,

Can you give me MTS2000 and MT2000 VHF 99 CH. and 255 CH. please ?

Batboard

MT2000 VHF code plug request (MTX838)

MT2000 VHF code plug request (MTX838)

MT2000 / MTS2000 VHF codeplug request