Page 1 of 1
Maxtrac B8
Posted: Mon Jul 17, 2006 8:27 pm
by n7ryy70
I have come across a Maxtrac model # D35MWA5GB8BK I am trying to program it to add some conventional 800 MHz repeater and simplex channels. It currently has a defunct Type 1 trunked system and a talkaround frequency. I am unable to read it using either the Maxtrac trunked or conventional sofware. Any suggestions????
Thanks
Jeremy
Posted: Tue Jul 18, 2006 7:15 am
by stvnd53
What RSS are you using?The reg.Maxtrac Rss WILL NOT do trunk!!!
Posted: Tue Jul 18, 2006 11:26 am
by n7ryy70
I am using the Maxtrac trunked software (Maxtracs), can't remember which version at the moment.
Posted: Tue Jul 18, 2006 1:43 pm
by xmo
Also, "I am unable to read it " is insufficient to determine the problem.
Copy the exact error message you get and post that.
Posted: Tue Jul 18, 2006 5:58 pm
by n7ryy70
I believe it was -- model not supported.
Posted: Wed Jul 19, 2006 3:24 am
by kcbooboo
Usually that means the version of the software you're using is too early to know about the model number you have, or maybe the radio was made for a non-US market and requires a different program. They do that on some European models. B8 is an odd model number.
Bob M.