Was just wondering if I can operate In Astro (IMBE) Mode (UHF) on a conventional repeater?
I remember seeing a post here sometime ago about this topic
I think It needs to be an 'open' (non PL) repeater ?
Any information on this topic, ideas/comments appreciated
Thanks !
Jon
Astro Mode In Repeater
Moderator: Queue Moderator
ASTRO On A Repeater?
Wait a second. It shouldn't work. The ASTRO signal is a 4 level FSK signal. How could a 4-Level FSK signal that is detected by a FM receiver and then re-transmitted as FM (not FSK) be decoded by a receiver looking for FSK?. I don't see how it could work.
I am using the words "shouldn't" and "could" instant of "won't" because I've seen some strnage things in electronics over the years.
Never say never.
-Shawn
I am using the words "shouldn't" and "could" instant of "won't" because I've seen some strnage things in electronics over the years.
Never say never.
-Shawn
- vks737adelaide
- Posts: 12
- Joined: Sat Mar 23, 2002 4:00 pm
Unfortunatley your right only a ASTRO signal is a 4 level FSK signal can be detected by a ASTRO signal is a 4 level FSK signal repeater and hence can only be used in conjunction with each other....the other problem will need a data-compatible repeater to repeat IMBE or Securenet ids and changing encryption keys
- Twisted_Pear
- Batboard $upporter
- Posts: 510
- Joined: Thu Sep 06, 2001 4:00 pm