SP50 Out of band question

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
U233
Posts: 6
Joined: Sat Aug 12, 2006 3:31 pm

SP50 Out of band question

Post by U233 »

I am trying to program a SP50 150-170 split for the ham band or a little below (MARS) When I use the shift method it says the limits are 145 to 180mhz. So I tried to hex edit the MDF file and it seems to ignore any changes I make to it. I changed the limits to 140 to 170 and matched the checksum but no joy.

What an I missing here?

Thanks

George
Last edited by U233 on Sun Sep 03, 2006 5:21 pm, edited 1 time in total.
Top
stvnd53
Posts: 168
Joined: Tue Jun 24, 2003 8:43 am

Post by stvnd53 »

Did you "HEX" all 3 spots,in the RSS?The 140.000mhz.is not hard to reach.
Top
Post Reply

Return to “Radio Programming”