Page 1 of 1
What button allows programming the Soft ID on Astro Spectra
Posted: Fri Sep 01, 2006 8:53 pm
by jmr061
Ok I figured out how to program the soft id feature on the astro saber/xts3000, but what control head button will get me to the programming of the soft ID on the astro spectra?
Jason
Posted: Sat Sep 02, 2006 1:40 am
by Dale Earnhardt
Depending on the flashcode... I haven't seen much astro spectra being able to do soft ID at all except for one person had it once..... heck mine doesn't even do it....
Posted: Sat Sep 02, 2006 4:21 am
by Josh
You need the computer and RSS to change the soft-id on the Astro Spectra.
-Josh
Posted: Sat Sep 02, 2006 5:56 am
by jmr061
So you are not able to change it from the keypad like you can with a portable?
Jason
Posted: Sat Sep 02, 2006 8:55 am
by Josh
KB9KST wrote:So you are not able to change it from the keypad like you can with a portable?
Jason
No.
there's no "menu" like there is on the portables either, and the display itself is very lacking, so even if it were possible, navigating to it would be a PITA in comparison.
But if enabled by the flash, and enabled in the RSS/CPS you can have a soft-id on an Astro Spectra, regardless of what was said prior.
I think mine either has my callsign or "JOSH BSE" or something silly like that.
-Josh
Posted: Sat Sep 02, 2006 9:39 am
by jmr061
Right, all mine astro portables and mobiles have soft id
I figured you could set it in a full keypad mobile W7/9) like you could in a portable. Guess that isn't the case and frankly that sucks but oh well. What can one do about it ----> Nothing. I'll just program it in the rss/cps I guess.
I haven't tried it but my guess it would work on a W3 however.
Thanks
Jason