MCS 2000 TYPE II

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
User avatar
DEK
Posts: 20
Joined: Tue Oct 30, 2001 4:00 pm

MCS 2000 TYPE II

Post by DEK »

With the dual heads installed on both a VHF and UHF set in my Fire Chief's car we are getting wicked noise through the rear amplified speakers from the engine - The filters are installed - any ideas. And why does the rear Speaker need to be such a big amp ?
Top
JD
Posts: 356
Joined: Tue Oct 16, 2001 4:00 pm

MCs2000

Post by JD »

I am going to be installing the same setup in an ambulance.I ordered the rear control package and noticed the hefty dc filter. My first thought was, Why? Now I know. If anyone knows something we don't ,please respond.
Thanks
Top
User avatar
AngelFire_91
Posts: 345
Joined: Fri Sep 21, 2001 4:00 pm

Post by AngelFire_91 »

Where is the filter installed at. If it is to far away from the head giving you problems, you will get Interferance between the Head and Filter. I know it's a simple answer but sometimes you just got to check.
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”