MCC 5500 paging ?

[KH]

Will it do display(digital) paging? I know it will analog 2 tone, etc...


Thanks!

[Bruce1807]

A 600 Ohm balanced, isolated audio input for external paging encoder audio input
External Paging Push To Talk input which works on all radio resources
Quick-Call I
Quick-Call II Tone and Voice
Quick-Call II tone Only
Quick-Call II Battery Saver
Single Tone
Digital Dial 1500 Hz
Digital Dial 2805 Hz
Touch Code (DTMF)
5/6 Tone
Custom Formats - Quick-Call II

Manual paging function
Sequential checklist paging
Talk Extend Time after Page
Talk Extend time can be configured from 1 to 25 seconds
There is a talk extend time after each page in the checklist is sent.
Pre-tone delay of 1 second after the transmitter is keyed before the paging tones are sent
PL-Strip during paging
Configure which resources are to have PL-Strip during paging
Remove encryption on channel prior to paging
10,000 pre-configured page aliases.
The paging tones being sent on a resource are heard at each dispatcher that has that resource assigned in the speaker normally used for that resource.
Paging Sidetone level can be set to be at average voice, at –12 dB from average voice, or not audible.
Page history window showing that 50 most recent pages sent.
The MCC 5500 console shall transmit page tones with a 6 dB per octave De-Emphasis.
The MCC 5500 console shall support No De-Emphasis during paging
The administrator shall be able to configure which resources are to have No De-Emphasis during paging
The MCC 5500 console shall support group page functions
The MCC 5500 console shall support 10,000 group page aliases.
The MCC 5500 console shall support 50 pre-configured page aliases in each group page alias.


In other words no but you can hook an external encoder to it

[KH]

Dang Bruce that's a big ole NO.

Thanks!