Batboard

I was looking into a programming cable for a PR400. Seems the Moto cable (programming/test) AAPMKN4004 goes for about $50 list.

I dug up this thread...

http://batboard.batlabs.com/viewtopic.php?t=19822

... that suggests that this cable...

http://www.batlabs.com/images/ctrprog.gif

... might do the trick. Looking at the programming cable schematic...

http://www.akardam.net/temp/pr400cable.pdf

... it sure looks like that's all you need simply to program the radio.

Any thoughts?

it works.

If all you want to do is prog.the radio,this is the way to go.I built one for a CP200 for $8.and 20 min.of my time ;All parts are at Radio-shack