JT1000 Transmit Issue

bondo · Post by **bondo** » Fri Oct 13, 2006 9:28 am

Greetings... I have a VHF model JT1000 that cause a low data type pulse noise when transmitting. It is very similar to a computer data burst that rythmiclly ticks. It does this when transmitting any frequency, also it is not affected by narrow/mid/wide settings. All sidetones and data settings are currently disabled...Radio works flawlessly otherwise.

Any ideas ?

Thank's
Randy

MTS2000des · Post by **MTS2000des** » Fri Oct 13, 2006 10:37 am

sounds like the famous Jedi noise which can be cured with a retrofit kit that has some better shielding of the RF board and controller. Don't have the REX number off hand, but it is actually called a "Jedi noise kit".

ka8ypy · Post by **ka8ypy** » Fri Oct 13, 2006 7:47 pm

Depending on the model here are the following kit numbers:

Full Keypad replacement kit
REX4395A List 63.50

Limited Keypad replacement kit
REX4396A List 69.50

Top display replacement kit
REX4397A List 69.75

2/8/16 channel replacement kit
REX4398A List 42.00

Hope this helps...

DB

phrawg · Post by **phrawg** » Sat Oct 14, 2006 8:34 am

He has a JT1000 and needs a NOISE KIT not ht1000 front panels.
I will look when I get to work monday. I may have a couple
on the shelf or if not I should be able to track down the # for you
if you have not got it from someone else by then. Phrawg

resqguy911 · Post by **resqguy911** » Sun Oct 15, 2006 5:24 pm

REX4465A

Rayjk110 · Post by **Rayjk110** » Sun Oct 15, 2006 6:20 pm

Oh god

My old JT1000 had this

It drove me NUTS, and yes, the Jedi Noise kit did fix it.