Hello All, With the Mic I got with my Convertacom, My voice is
very Tinny or Naisal. I grabed a Mic from a 800 mhz Maxtrac
and that seemed to help a lot.
The Mic is a press fit or glued together, no screws. Is there a way to
rememdy this.
Thanks and Best 73s
John de N0TOP
Naisal MT1000 in Convertacom
Moderator: Queue Moderator
-
- Posts: 21
- Joined: Sat Feb 18, 2006 9:14 am
- What radios do you own?: Maratrac,Spectra and Maxtrac
Naisal MT1000 in Convertacom
John de n0top
That kind of mic is not repairable, but if you must look inside it,
usually the aplication of about 16 ounces of steel attached to
a handle, (hammer) swung swiftly and aimed accurately will
cause the thing to reveal its innards ! Also a good squeeze
in a vice will crack it but does so without all of the fun and
drama associated with an impact. Phrawg
usually the aplication of about 16 ounces of steel attached to
a handle, (hammer) swung swiftly and aimed accurately will
cause the thing to reveal its innards ! Also a good squeeze
in a vice will crack it but does so without all of the fun and
drama associated with an impact. Phrawg
BBbzzzzz... ZAP.. GULP !!! ahhhh GOOD fly !