Page 1 of 1
MT2100 codeplug to MC2100 ?
Posted: Thu Apr 19, 2007 10:12 pm
by sb
Hi!
Is it possible to dump MT2100 codeplug to MC2100 ?
Both stations will work on the same sistem with 100+ channels and
I don`t want to start from zero with MC2100
Posted: Thu Apr 19, 2007 10:51 pm
by Andreas
No,that´s not possible.
Andreas
Posted: Fri Apr 20, 2007 12:21 am
by sb
Hi!
I thought so
Well another day spent in DOS enviroment
Posted: Mon Apr 23, 2007 11:52 am
by bup3
Hi,
It's also possible to import zones,channels, & signalling options from one CP to other with Wookie...(just for european jedi series).
Bye
Posted: Mon Apr 23, 2007 12:40 pm
by Andreas
Yes Wookie Mobius will do this,but it is not a good choice to program a MC2100 with Wookie Mobius,because you cannot tune the front end with it and sometimes the radio crash.
Andreas
Re: MT2100 codeplug to MC2100 ?
Posted: Sat Aug 18, 2007 1:15 pm
by 11439
Is it a CPS for MC2100? My MC2100 is a VHF used within the FIREDEP here in Norway.
I want to put in VHF Hamfrequency and police/ambulance to!
Re: MT2100 codeplug to MC2100 ?
Posted: Sat Aug 18, 2007 1:17 pm
by 11439
Is it a way to make a RSS innto CPS? As it is NT-enviroment now in theese days and NT and old DOS do NOT communicate.
Re: MT2100 codeplug to MC2100 ?
Posted: Sat Aug 18, 2007 3:33 pm
by Andreas
No,there is no CPS.
Try to get the 2100 series DOS RSS,disable the cache in the Bios and boot the PC with DOS.
Andreas