Batboard

As the listing say I have a HT1550 XLS UHF cosmetically it is in EXCELLENT shape transmits and receives great BUT the dispaly is bad tons of dead pixels cand anyone help me out?

Jim

You will need to replace the LCD display among other things to fix this as this is a known issue with the HT1550XLS.

- LCD part number 5105385Y57. This is the same as the old one. All old parts have been purged.
- Keypad board part number 0104020J46. This should be a Rev. F which is printed on the board itself.
- Poron pad part number 7586477Z01. This needs to be placed on the back of the speaker magnet.
- Display pad part number 7585688Z01. This needs to be placed between the plastic housing and the new LCD.

SRN related to the missing pixels - SRN1502A

Symptoms:
Radios exhibit missing pixel rows or columns in its display.
Potential Problem Radios:
All HT1550XLS radio’s built before date code 5305 are potentially affected. Eligible serial numbers for this repair are
xxxxFPxxxx or earlier. Tanapa numbers are as follows:
VHF (136-174MHz) UHF Band1 (403-470MHz) UHF Band 2 (450-527MHz)
PMUD1716A PMUE1762A PMUE1763A

One can be found cheaply on eBay.

Looked on Ebay don't see one.

Jim

Yes there is. Just found one.

Must be a secret


PM sent jim

J.Sanor wrote:Must be a secret


PM sent jim

it's not a secret. It's just not my auction so I didn't post a link here in the open. If you would like the link shoot me a pm and I will pass it out.