Batboard

Is there a way to put an MT2000 A7 into test mode by using a combination of power on and a side button?

Yes.

Turn the radio off, then on. Press the button directly above the PTT 5 times, and you'll see SERVICE pop up on the screen.

-Alex

Thanks Alex, it worked! is there anyway to get the screen to slow doen so I can copy the serial number? It goes quickly to "RF test" then I don't know what to do.

Nope! Sorry. Not that I know of at least.

I don't know how to navigate the RF TEST menus, I can get them to change and such, but can't do much with it.

If you figure it out, and what things do what, let me know.

-Alex

N2YP wrote:Thanks Alex, it worked! is there anyway to get the screen to slow doen so I can copy the serial number? It goes quickly to "RF test" then I don't know what to do.

Get the camcorder out, and tape it. Frame step the playback.

Bob W wrote:

N2YP wrote:Thanks Alex, it worked! is there anyway to get the screen to slow doen so I can copy the serial number? It goes quickly to "RF test" then I don't know what to do.

Get the camcorder out, and tape it. Frame step the playback.

Thanks Bob, great idea. By doing it a bunch of times, I was finally able to get the info I needed. This Board ROCKS!

I bit the bullet and plunked down my$250 to big M. Here is what I got:
3 years of updates. A dos disk for the mt2000 version R06.05.00 dated 2 Oct 2000; A cdrom for the mts2000. A tech told me that M will NOT be making anykind of windows version for the mt2000. Anybody got an MTS2000 for sale!

MTS2000 for Sale??? Yes I do.... VHF Model I 9.9/10

Jaqx