Page 1 of 1

Stored voice wont store; after two tones PLUS alert tone

Posted: Sat Jan 19, 2008 7:36 am
by firefighter2000
I have a minitor IV with stored voice. When we're dispatched, you have the two tones that "ALERT" the pager... Then a fast hi-lo tone Im guessing is just an attention tone or whatever. Problem is, as soon as the fast hi-lo tone starts going off the stored voice cuts off so that only about one second is stored and nothing more. Anyone help?
Thanks
Craig

Re: Stored voice wont store; after two tones PLUS alert tone

Posted: Mon Jan 21, 2008 5:08 pm
by RFguy
Does the carrier drop between the 2-tone and the warble tone, or between the warble tone and the voice?

There is a setting in the Minitor that will ignor carrier drops for a certain period. If that is not set, then as soon as the carrier drops, the recording stops. (I think it is revert-N??)

Re: Stored voice wont store; after two tones PLUS alert tone

Posted: Mon Jan 21, 2008 5:21 pm
by n7maq
RFguy wrote:Does the carrier drop between the 2-tone and the warble tone, or between the warble tone and the voice?

There is a setting in the Minitor that will ignor carrier drops for a certain period. If that is not set, then as soon as the carrier drops, the recording stops. (I think it is revert-N??)
Correct on the Revert-N, try Revert-10. (it will change it to something like 9.87, but that is OK)

Jim