Batboard

Hi all!

How many channels hold Motorola MT2100 Model I?

I have spent hour for searches in Google, but have found the information only about Model III (aka B7/C7).

if it has a channel switch without a stop it can hold 250 channels.
this whas when i programmed with wookie,

i dont know how manny channels it takes with the official dos rss.

All MT2100 are capable of 250 channels. Wookie or regular Skywalker RSS doesn`t matter. A continous rotary radio is very nice to have. I allows to use all 250 channels also on top-display radios without keypad. You are no more limited to 16 channels each zone, but 3 Zones are the maximum (switchable via 3-position toggle switch).

Keygun

Thank you, Keygun.

But what will be if MT2100 flashed from MTS2000 Model I? It will not have continous rotary

It is also no big deal. Replace the channel switch or (more simple) the whole control-flex/screen-assembly with one from a continous rotary radio (a scrap GP1200 is an ideal donation radio, because all of them have a continous rotary), change the modelnumber via Wookie and reprogramm the radio. It should work then. In the worst case you have to run the upgradetool again, but if i remember correct, this is only neccessary, if you are turning a top-display radio into an full-keypad model and vice versa.

Keygun

You are not limited to 16 channels each zone!
You can use up to 250 channels in one zone.
You are limited to 16 zones.

Andreas