hi group~
I picked up a couple of no display mtx-9000's at dayton cheap. they program up a-ok, but they show only having 16 channels max. I can program much more personalities in to it & i was assuming i could do 3 zones of 16 channels each using the A-B-C switch (like my display top version)
Is there a way to up the max channels? bit-banging perhaps?
tnx,
joe K8ICV
mtx9000 max channels?
Moderator: Queue Moderator
-
- Posts: 34
- Joined: Tue Jun 07, 2005 6:22 pm
Re: mtx9000 max channels?
Load in a MTS2000 codeplug. That is what I do to get 48. If you need a cp let me know. Will will need to check and most likely re-align.The Kreick wrote:hi group~
I picked up a couple of no display mtx-9000's at dayton cheap. they program up a-ok, but they show only having 16 channels max. I can program much more personalities in to it & i was assuming i could do 3 zones of 16 channels each using the A-B-C switch (like my display top version)
Is there a way to up the max channels? bit-banging perhaps?
tnx,
joe K8ICV
Jim
Jim